A floor spinner makes quick work of open tile. Then you reach the shower walls, the vanity top, the backsplash and the grout line that hugs the base of the toilet, and the big tool can't follow. The EDIC Countertop Revolution 700REV is the handheld answer: a 7 inch spinner that weighs 4.8 lb, so you can hold it flat against a wall or a counter and clean with the same high-pressure extraction you use on the floor.
It's the handheld version of the Revolution 1200REV floor tool ($1,281). Two hi-flow jets on a spinning arm blast the grout while your vacuum pulls the dirty water back through the 1-1/2 inch hose, and the teardrop shaped head runs its point right into inside corners.
EDIC built it for the Endeavor multi-surface cleaner and recommends 800 to 1500 PSI. It also works with any other high-pressure extractor that reaches that range.
Teardrop head with a pointed nose: cleans into wall and floor corners and tight around fixtures, where round tools leave a dirty ring.
Light enough to hold on a wall: at 4.8 lb, shower surrounds, tub decks and backsplashes don't wear out your arms.
Dual jet, hi-flow spinning arm: even coverage without the streaks a hand brush leaves behind.
Extraction, not just spraying: the vacuum recovers the water as you go, so there's less overspray to wipe and the surface dries faster.
Rated to 2500 PSI: comfortable on a 1200 PSI portable like the Endeavor and on a truck mount.
Built to be serviced: a serviceable swivel fitting, nickel plated brass solution fittings and a rotationally molded housing with a skirt brush.
|
Countertop Revolution 700REV |
Revolution 1200REV |
| Best for |
Walls, showers, counters, backsplashes, corners and edges |
Open tile and grout floors, concrete |
| Head |
7 in, teardrop shape |
12 in, round |
| Weight |
4.8 lb, held in one hand |
13 lb, T-handle that folds to 180 degrees |
| Pressure (EDIC) |
800 to 1500 PSI, rated to 2500 |
800 to 1500 PSI, rated to 2500 |
| Price |
$994 |
$1,281 |
Most crews doing restroom and kitchen restoration end up with both: the 1200REV for the floor, the Countertop Revolution for everything above it and along the edges.
EDIC's manual lays out a simple routine:
Prep: vacuum or wipe off loose debris, and mask cabinets, painted walls and carpet edges against overspray.
Pre-spray: apply the right pre-spray for the surface and keep dwell time to 5 minutes or less so the grout doesn't get overwet before sealing.
Clean: connect the vacuum and solution hoses, start the vacuum, hold the head flush with the surface and squeeze the trigger. Move at a moderate pace with a small overlap. Going too fast can leave a spiral pattern in the grout.
After the job: disconnect and check the hoses, wipe the tool with a damp cloth and store it indoors, never in freezing temperatures. Check the spray tips weekly and don't bend their angle.
| EDIC® Countertop Revolution Specifications |
|---|
| Brand |
EDIC |
| Model |
700REV |
| Head |
7 in, teardrop shape |
| Spray Jets |
2, on a spinning arm |
| Recommended Pressure |
800 to 1500 PSI |
| Maximum Pressure |
2500 PSI |
| Solution Temperature |
Up to 200°F |
| Vacuum Connection |
1-1/2 in |
| Solution Fittings |
Nickel plated brass, 1/4 in quick connect |
| Housing |
Rotationally molded LLDPE |
| Swivel |
Serviceable |
| Tool Weight |
4.8 lb |
| Shipping |
7 lb, 15 x 15 x 15 in box |
| Hoses |
Not included |
| Warranty |
5 years parts and labor, lifetime on the poly housing |
Downloads
Building out an Endeavor for restrooms? Add the 991RS chemical feed system ($862) and the 9034ACK touchless restroom kit ($596).
Found a lower price? Call or message us and we'll beat it. Returns follow our return policy.
Not sure your extractor reaches 800 PSI? Call (855) 601-5678 or message us your model number and we'll check it before you order.
