EDIC® Dual Head Squeegee Wand with Scrub Brush, 14" Head #334ACH-2
(855) 601-5678 · support@oneupcleaning.com
Some soil won't rinse off. Grout lines around a urinal, a sticky film on a kitchen floor, the corner behind a toilet: they need agitation before you vacuum them up. The EDIC 334ACH-2 dual head squeegee wand puts a scrub brush and a squeegee on the same 14 inch head. Scrub the tough spots with the brush, flip the head over, and squeegee the water into the vacuum.
It's the floor tool EDIC ships with every CR2 and CR2 Jr touch-free restroom cleaner and with the Endeavor hard surface kits, so it's also the replacement when yours wears out or goes missing. The S-bend aluminum wand reaches under toilets, urinals and sinks, and fits any extractor with a 1-1/2 inch vacuum hose.

1. Apply: coat the floor with your restroom chemical using the spray gun on low pressure, and give it its dwell time.
2. Scrub: work the brush side over grout lines, around toilet bases and in corners where soil builds up.
3. Rinse: switch the spray gun to high pressure and rinse the loosened soil toward the open floor.
4. Recover: flip the head to the squeegee side and pull the water into the vacuum, leaving the floor nearly dry.
Need a gun for steps 1 and 3? The 9000AC high/low pressure spray gun ($161) is the one EDIC pairs with the Endeavor.

| 334ACH-2 (this wand) | 334ACH squeegee wand | |
|---|---|---|
| Price | $287 | $435 |
| Head | 14 in, scrub brush on one side, squeegee on the other | 13 in squeegee |
| Spray jet | None listed by EDIC; rinse with a spray gun | Yes, trigger controlled |
| Best for | Scrubbing soil loose, then picking up | Rinsing and picking up in one pass |
| Wand | Two-piece S-bend aluminum | 1-1/2 in aluminum, one piece |
| Comes with | CR2, CR2 Jr and the Endeavor hard surface kits | Endeavor 9034ACK touchless restroom kit |
| EDIC® Dual Head Squeegee Wand Specifications | |
|---|---|
| Brand | EDIC |
| Model | 334ACH-2 |
| Head | 14 in reversible, scrub brush and squeegee |
| Wand | Two-piece S-bend aluminum |
| Vacuum Connection | 1-1/2 in |
| Shipping Weight | 7 lb |
| Shipping Box | 28 x 12 x 10 in |
| Fits | EDIC CR2 2700RC, CR2 Jr 2000RC and Endeavor; any extractor with a 1-1/2 in vacuum hose |
| Replacement Blades | E11184 (ask us) |
| Warranty | EDIC standard limited warranty |
Restroom floors that mostly need a rinse and pickup? The 334ACH squeegee wand has a spray jet in its head and does both in one pass. On an Endeavor, the 9034ACK touchless restroom kit ($596) bundles it with the spray gun.
Found a lower price? Call or message us and we'll beat it. Returns follow our return policy.
Need replacement blades or not sure it fits? Call (855) 601-5678 or message us with your model number.
Yes. EDIC ships the 334ACH-2 dual head wand with every CR2 and CR2 Jr, and with the Endeavor Hard Surface, Carpet & Hard Surface and Complete kits. Order this one to replace a worn or lost wand, or to keep a second one on another cart.
EDIC doesn't list a spray jet on the 334ACH-2; it's built for scrubbing and pickup, and you rinse with the spray gun. If you want a squeegee that rinses as it picks up, look at the 334ACH, whose 13 inch head has its own trigger-controlled jet.
It fits the Endeavor and any extractor with a 1-1/2 inch vacuum hose, so Galaxy owners can use it for hard floors too. Since it doesn't spray, it only needs the vacuum hose.
The wand is a two-piece aluminum tube that joins together, which keeps the box short (about 28 inches) and lets you break it down for storage on the machine or in a van.
Yes. EDIC sells replacement blades for the dual head squeegee under part number E11184. Message us and we'll add them to your order.
No, it's a hard surface tool. To clean carpet with a CR2, add one of the CR2 carpet kits, which bring a carpet wand and a heater.
EDIC's standard limited warranty covers defects in material and workmanship. Squeegee blades and brush bristles are wear parts. Call or message us with your order number and we'll handle any claim with EDIC.