Clarke® CarpetMaster® 112 & 115 Single Motor Drive Belt Kit 1470905500
(855) 601-5678 · support@oneupcleaning.com
On the single motor Clarke CarpetMaster 112 and 115, one 1,000 W motor makes the suction and turns the brush through toothed belts. This is Nilfisk's genuine drive belt kit for those two machines.
As shown in Nilfisk's kit photo, it comes with two toothed drive belts plus the drive gear, washer and nut, so the whole drive is refreshed in one job. It does not fit the dual motor 212, 215 or 218, which use kit 147 0905 510.
If the motor runs normally but the brush slows down on carpet or stops turning, check the brush first: unlock it, pull it out and clear any string or hair wrapped around it. If the brush spins freely by hand and still doesn't turn under power, the belts are the usual suspect.
Clarke's 100 series brochure covers motors and belts for 2 years, so on a newer machine ask for warranty before you buy. Clarke's operator manual doesn't include belt replacement steps, so if you're not comfortable opening the base, a service shop can fit the kit. Send us your model and serial and we'll confirm the kit before you order.
| Specifications: Clarke Drive Belt Kit 1470905500 | |
|---|---|
| Brand | Clarke (Nilfisk) |
| Part number | 147 0905 500 (1470905500) |
| Nilfisk name | Drive belt kit |
| In the kit | 2 toothed drive belts, drive gear, washer, nut |
| Fits | CarpetMaster 112 and 115 (single motor) |
| Does not fit | CarpetMaster 212, 215, 218 (use 147 0905 510) |
No. The dual motor 212, 215 and 218 use kit 147 0905 510. This kit is for the single motor 112 and 115.
Two toothed drive belts with the drive gear, washer and nut, as shown in Nilfisk's photo.
The motor runs but the brush slows or stops on carpet, even with nothing wrapped around it. Check the brush first, then the belts.
Clarke's 100 series brochure lists motors and belts at 2 years. Contact us with your serial number before buying a replacement on a newer machine.