Carpet Cleaner America 50 ft 12-Gauge Extension Cord for CRB Machines
(855) 601-5678 · support@oneupcleaning.com
Every new TM4 and TM5 comes with a 50 ft 12-gauge extension cord, because Carpet Cleaner America says its larger CRB (counter-rotating brush) machines need a 12-gauge cord to run efficiently. This is that cord, sold on its own for a second crew, a second machine or a cord that's been cut, crushed or run over.
A 12-gauge cord has thicker conductors than the 14 or 16-gauge cords sold for home use, so it carries the machine's current over the full 50 ft with less voltage drop.
The cord CCA specifies for the TM4 and TM5, so you're not guessing at the gauge.
50 ft of reach to clean the far end of a classroom or office from a single outlet.
Coils onto the cord hook on the handle upright, so it stays off the carpet while you work.
A spare on the truck means a damaged cord doesn't end the night's route.
If you run a TM4 or TM5, you already have one, so this is a spare or a replacement. The TM3 doesn't ship with a cord because its smaller motor runs fine on a standard extension cord, although a 12-gauge cord does no harm and gives TM3 owners the same 50 ft reach.
Want more from your machine? Add the SPX onboard sprayer to a TM4 or TM5, or keep a spare set of TM3, TM4 or TM5 brushes on the truck.
| Specifications: Carpet Cleaner America 50 ft 12-Gauge Extension Cord | |
|---|---|
| Brand | Carpet Cleaner America |
| Length | 50 ft |
| Wire gauge | 12 AWG |
| Included with | New TM4 and TM5 machines (not the TM3) |
| Fits | TM3, TM4 and TM5 CRB machines |
| Stores on | The X 345H cord hook |
Not sure which part your machine needs? Call (855) 601-5678 or email support@oneupcleaning.com with your machine model, and we'll tell you.
Yes for the TM4 and TM5, which ship with a 50 ft 12-gauge cord. The TM3 doesn't include one because it runs on a standard extension cord.
Carpet Cleaner America says the larger machines need a 12-gauge cord to run efficiently. A thinner cord over 50 ft carries less current to the motor.
Yes. The TM3 doesn't need a 12-gauge cord, but it runs fine on one.
Yes. The X 345H cord hook is made to hold a coiled 50 ft 12-gauge cord.