Orbot Micro SuperZorb Pads (Case of 10)
(855) 601-5678 · support@oneupcleaning.com
SuperZorb pads turn your Orbot Micro into a low-moisture carpet cleaner. Orbot makes them from a highly absorbent cotton and polyester blend. As the heads orbit, the pads soak up the soil your encapsulation cleaner has loosened and lift the carpet pile, so stairs and upholstery dry faster.
They're washable and reusable. Orbot says a pad can be used hundreds of times, so this case of 10 goes a long way on a daily stair route.
Cotton and polyester blend absorbs moisture and soil instead of pushing it around the fibers.
Lifts the carpet pile, so your stairs look groomed and dry faster.
Washable and reusable hundreds of times, according to Orbot.
Elastic edge stretches over the Micro's driver plates for quick changes mid-job.
Vacuum first, then pre-spray with your encapsulation cleaner. Fit the Micro with its Velcro driver plates, center a pad on each one and stretch the elastic ring over the plate. Turn the heads by hand to make sure the two pads don't touch. Work in a crosshatch with light pressure, and swap in a fresh pair when the pads load up with soil.
Clean pads before they dry. Spray mild detergent on the face, work it in, and let them soak in a bucket of warm, diluted detergent. Rinse, squeeze them dry without twisting or wringing, and let them air dry. Never wash them in gasoline or solvents.
Need to strip finish instead? Try AkwaStrip pads. For scrubbing, see the Orbot Micro brushes.
| Brand | Orbot |
| Fits | Orbot Micro stair and upholstery tool (HOSOM) |
| Quantity | Case of 10 pads |
| Material | Absorbent cotton and polyester blend |
| Mounting | Elastic ring over the Micro Velcro driver plate |
| Care | Washable and reusable; mild detergent only, no solvents |
| Part Number | HOSOMSZP |
Questions? Call (855) 601-5678 or email support@oneupcleaning.com.
Yes. Orbot says they can be washed and reused hundreds of times. Clean them before they dry with mild detergent and warm water, squeeze them out without wringing, and air dry.
Yes. The pads stretch over the Micro's Velcro driver plates with their elastic ring, so you need the driver plates fitted to the heads first.
No. These are made for the Micro's small twin heads. The larger Orbot machines use SuperZorb pads sized to their own bases.