The hard pair gives your Tornado Vortex 13 stiffer bristles for the jobs where the standard brushes leave soil behind.
Tornado's brush chart calls for the hard brushes on the first-time cleaning of smooth concrete. Once that floor is clean, the chart moves you back to the standard pair for routine maintenance, so the hard set comes out for the heavy jobs and goes back on the shelf in between.
Think of it as the restorative pair: back-of-house concrete, garage and warehouse slabs, or a floor nobody has scrubbed properly in a while.
The hard brushes come as a pair, one for the front shaft and one for the rear. The front brush does most of the scrubbing; the rear brush finishes the job and collects the remaining water, so both are replaced together.
Tornado makes four brush pairs for the Vortex 13:
Which Vortex 13 Brush Do You Need?
| Floor |
First-time cleaning |
Maintenance cleaning |
| Grouted tile, ceramic, mosaic, wood, sports floors, rubber, vinyl tile |
Standard |
Soft |
| Short pile carpet |
Soft/Carpet |
Soft/Carpet |
| Marble, granite, slate |
Soft |
Soft |
| Smooth concrete |
Hard |
Standard |
Source: Tornado Vortex 13 operator manual, brush selection chart. Other floors: choose to suit the floor's condition.
Swapping Brushes Without Tools
Per Tornado's manual: switch the machine off and unplug it, then pull the two brush shafts. They're held by quick-release retaining balls, so no tools are needed. Slide the brushes off, fit the new pair, and push each shaft back in from the right-hand side of the machine (the side with the power cable and foot pedal), which Tornado notes is the easier way in.
The small multicolored plastic plugs on the brushes are there to identify them, so you can keep a set for each area of a building and avoid carrying soil from one area to another.
Make Your Brushes Last
Wash the brushes regularly. Dip them in a bucket or sink, or rinse them under running water.
Store spare pairs standing vertically so the bristles don't bend.
Don't leave the brushes fitted on a machine that sits idle for days. The bristles take a set in one direction; if that happens, reverse the brush so they can flex back.
Always move the machine in transport mode. Transporting it with the brush control in the working position damages the brushes.
Add the 93049 side brush for edges along baseboards, and the Tornado transport cart for moving the machine between floors. Running the larger Vortex 18? It takes 18 in brushes, such as the hard pair for the Vortex 18.
Not sure which Vortex you have? Call (855) 601-5678 or send us a message with your machine's model number and we'll confirm the fit. See every Tornado line on our Tornado page.