Tornado Vortex 13 Multi-Surface CRB Scrubber

Most floor scrubbers are built to handle open spaces. Hallways, lobbies, wide warehouse aisles. That's great until you need to clean under bathroom vanities, around gym equipment, or between restaurant booths. The Tornado Vortex 13 is built for the places other scrubbers can't physically reach, and it still delivers a deep, professional clean on every surface in your facility.

Two counter-rotating cylindrical brushes spin at 650 RPM with 190 g/cm² of downward pressure, scrubbing in opposite directions to lift embedded dirt, agitate carpet fibers, and restore grout lines in a single pass. The Vortex 13 lays down just the right amount of cleaning solution, scrubs it in, and recovers the dirty water immediately. Your floors are clean and dry enough to walk on right away. No puddles, no wet floor signs, no waiting around.

With a 13 in (330 mm) cleaning path, this CRB scrubber is compact enough to navigate tight restrooms and crowded kitchens, yet productive enough to cover 3,767 sq ft/hr (350 m²/hr) across open areas. Tile and grout, rubber gym flooring, LVT, VCT, commercial carpet, hardwood, epoxy, even concrete. One machine handles the rotation instead of three or four dedicated tools collecting dust in your supply closet.

At 58 lbs (26.3 kg), the Vortex 13 is light enough for any member of your cleaning crew to operate comfortably. The 40 ft (12.2 m) power cord gives you serious reach from a single outlet, and the low-moisture cleaning process means you're using a fraction of the water and chemical that traditional mop-and-bucket or automatic scrubber methods require. Less chemical cost, less water waste, and floors that dry in minutes instead of hours.

• Counter-rotating cylindrical brushes spin at 650 RPM in opposite directions, agitating and lifting dirt that single-direction machines push around

• Low-moisture cleaning uses only 1 gal (3.8 L) of solution at a time, cutting chemical and water costs while leaving floors dry enough to walk on almost immediately

• 0.75 gal (2.8 L) recovery tank captures dirty water on the spot, so you're not spreading grime from one area to the next

• Swap brushes in seconds to match the surface you're cleaning today. Standard brushes ship with the machine, and soft, hard, and escalator brush options let you dial in the right level of agitation for every floor type

• 58 lbs (26.3 kg) operating weight keeps the machine manageable for every member of your team, no wrestling required

• 40 ft (12.2 m) cord covers large areas from a single outlet without the extension cord tango

• 69 dB(A) noise level is quiet enough to run during business hours without clearing the building (that's about normal conversation volume)

• Polyethylene tank construction stands up to commercial cleaning chemicals without cracking or corroding over time

Here's how CRB technology works, and why it outperforms a standard rotary or mop setup. The two cylindrical brushes rotate toward each other at 650 RPM, creating an aggressive scrubbing zone right at the cleaning path. Dirt and debris get pulled into the center, lifted off the surface, and swept into the recovery tank. Because the brushes spin in opposite directions, you get twice the agitation in a single pass compared to a machine with one rotating pad or brush.

The solution system feeds a controlled amount of cleaning chemical onto the floor just ahead of the brushes. This low-moisture approach means the floor gets cleaned, not flooded. For carpets, that's the difference between a deep clean that's ready for foot traffic in 30 minutes and a soggy mess that takes half a day to dry (and might grow mold underneath if you're unlucky). For hard floors, it means no slip hazards, no residue buildup, and dramatically lower chemical consumption.

The Vortex 13 is only 15 in (38 cm) long and 18 in (46 cm) wide. Fold the handle down and the machine slides under bathroom cabinets, restaurant booths, gym benches, and hospital bed frames without breaking a sweat. Most walk-behind scrubbers can't even fit through a standard restroom stall door, let alone clean around the base of a toilet. This one can.

That compact footprint makes the Vortex 13 a natural fit for kitchens, locker rooms, patient rooms, and any space where furniture isn't moving just because it's cleaning day. And when you add the optional side brush, you pick up edge-to-edge cleaning along baseboards and walls without a separate detail pass.

This is where the Vortex 13 earns its keep. With the standard brushes that ship with the machine, you can clean tile and grout, VCT, LVT, rubber, epoxy, hardwood, carpet and many more. That covers just about every surface in a school, gym, hospital, office, retail store or restaurant. And it works for homes too.

Need to dial in the agitation level? Tornado offers surface-specific brush options that snap in and out in seconds. Soft brushes are designed for delicate surfaces like marble, granite, and slate, plus everyday maintenance cleaning on common flooring. Hard brushes bring extra bite for smooth concrete and heavily soiled first-time deep cleans. And escalator brushes turn the Vortex 13 into a dedicated escalator cleaning machine for retail and transit facilities. Two brushes are required per set, and they swap out without tools.

If the Vortex 13's compact 13 in (330 mm) cleaning path handles your tighter spaces perfectly but you also have larger open areas that need faster coverage, take a look at the Vortex 18 Scrubber. It gives you an 18 in cleaning path and 4,844 sq ft/hr of productivity for gymnasiums, convention halls, and wide corridor runs.

Moving the Vortex between floors or job sites?

The Tornado transport cart makes it easy to wheel the machine through hallways and up stairs without carrying it. Works with both the Vortex 13 and Vortex 18.

Downloads

Tornado Vortex 13 Product Brochure

Tornado Vortex 13 Owner's Manual