Skip to content
EDIC 1035-110015FB stainless steel stair and van carpet wand with 10 inch winged head

EDIC® Stair and Van Carpet Wand, 10" Stainless Steel Head, 30" Long, 1000 PSI #1035-110015FB

by EDIC
$253.00

Notify me when back in stock

Authorized Retailer EDIC
Ships within 2–4 Business Days
Estimated Delivery 6–9 Business Days
Financing Available at CheckoutBreak up your purchase into manageable monthly payments
No Sales Tax Tax-free in all states except Wyoming
Manufacturer Warranty IncludedEDIC standard limited warranty · Coverage backed directly by EDIC
Found a Lower Price? We'll Beat It. Call or send us a message and we'll beat any competitor's price.
(855) 601-5678  ·  support@oneupcleaning.com
  • 30 in stainless steel wand with a 10 in winged head, 4.5 lb
  • Insulated grab handle, 1000 PSI rating, 1.5 in tube for EDIC hoses
  • For carpeted stairs, vans, trucks, RVs, closets and other tight spots
  • Wand only; uses your machine's hose assembly

EDIC 1035-110015FB Stair and Van Carpet Wand: A 30 Inch Wand for Stairs, Vehicles and Tight Spots


A 60 inch floor wand is the wrong tool on a staircase. You can't get the head flat on the tread without leaning over the rail, and in a van or an RV it hits the roof before it hits the carpet. The EDIC Stair and Van Carpet Wand is half the length: 30 inches overall with a 10 inch winged head, light enough at 4.5 lbs to work one-handed on a tread while you hold the rail with the other.

It's built like EDIC's full-size Glidemaster wands: corrosion-resistant stainless steel, a 1.5 inch vacuum tube that fits EDIC hoses, a female quick disconnect for the solution line, and a 1000 PSI pressure rating. The insulated grab handle stays cool with a heated machine, and the winged head improves suction and keeps spray off the walls and risers.

Use it on carpeted stairs and landings, van and truck floors, cargo areas, RV and boat carpet, closets, and the spaces under desks and between seating that a full wand can't reach.

EDIC 1035-110015FB stainless steel stair and van carpet wand with 10 inch winged head

What It Fits and How It Compares

  • Fits EDIC portables with a 1.5 inch vacuum hose and quick-connect solution line: the Galaxy 5, Galaxy 2000, Galaxy Pro 2700, the Polaris and Supernova in hose mode, the Endeavor, and the Galaxy automotive extractors.

  • Spray tip: 110015, the same size as the 100 to 250 PSI Glidemaster dual jet. On a 500 PSI machine it sprays heavier, so turn the pressure down or make quicker passes.

  • The wand comes without a hose. Use the hose assembly that came with your machine or kit.

Three tools for the jobs a floor wand can't do:

  • Stair and van wand, this page ($253): 30 inch, 10 inch head. For stair treads, vehicle floors and tight carpet you can stand over.

  • Glidemaster 10" single jet ($266): full 60 inch length with the same 10 inch head width. For closets, hallways and small rooms where you can walk backward.

  • Upholstery tool: a small hand tool for chairs, sofas and seats. For fabric rather than carpet. Message us and we'll match one to your machine.

EDIC® 1035-110015FB Stair and Van Wand Specifications
Brand EDIC
Model 1035-110015FB
Type S-bend stair and van carpet wand
Head Width 10 in, winged
Overall Length 30 in
Vacuum Tube 1.5 in stainless steel
Spray Tip 110015, brass
Maximum Pressure 1000 PSI
Handle Insulated grab handle
Connection Female quick disconnect
Wand Weight 4.5 lb
Shipping Weight 7.5 lb
Warranty EDIC standard limited warranty


After each job, run clean water through the wand for a minute to flush detergent out of the tip, and rinse the vacuum tube so residue doesn't dry inside it.

Found a lower price? Call or message us and we'll beat it. Returns follow our return policy.

Add it to your cart, or message us with your machine model if you're not sure it fits.

Frequently Asked Questions

What is the stair and van wand for?

Carpet a full-length wand can't reach comfortably: stair treads and landings, van and truck floors, cargo areas, RV and boat carpet, closets and under desks. At 30 inches you can hold it one-handed and keep the head flat on a tread.

Which machines does it fit?

EDIC portable extractors with a 1.5 inch vacuum hose and a quick-connect solution line: the Galaxy 5, Galaxy 2000, Galaxy Pro 2700, Endeavor and the Galaxy automotive extractors, plus the Polaris and Supernova in hose mode. EDIC shows it working on a Supernova.

Does it come with a hose?

No. It connects to the hose assembly that came with your machine or hose and wand kit.

What pressure should I run it at?

It's rated to 1000 PSI and uses a 110015 spray tip, the same size as the Glidemaster dual jet for 100 to 250 PSI machines. At 500 PSI it sprays heavier, so turn the pressure down or move a little faster.

Stair wand or upholstery tool?

Use the stair wand on carpet: stairs, floors and vehicle carpet. Use an upholstery tool on fabric: chairs, sofas and seats, where a smaller head and gentler spray protect the material.

Why do some listings say 12 inches and 36 inches?

The spec table on EDIC's own page shows 12 in wide, 36 in long and 13 lb, which conflicts with EDIC's feature list on the same page and with every dealer listing (10 in head, 30 in long, 4.5 lb wand, 7.5 lb shipping). We list the 10 in and 30 in figures.

Got a Question?

(855) 601-5678

We PRICE MATCH

Call us or send us a Message!

Send us a Message

We're SUPER quick!